Equipment
Tool for removing teeth from sewn coil zippers
- Code
COC4
- Operation
- Removing teeth
- Zipper type
- Coil
Description
Manual tool for shortening 4, 6 and 8 mm sewn coil zippers, which removes the coil and leaves the tape of the zip completely smooth.
The two blades slide under the coil and cut its stitching, separating it from the tape. The detached coil is then removed with scissors or wire cutters. The tool works on its own, without a press. It is not suitable for woven coil zippers, for which the pneumatic machine is available.
Top or bottom stops can be attached to the shortened section, but not pin and box. This is because the cord, which guides the components of open-end zippers, is removed along with the coil.
Before ordering, please send us a sample of the zipper, so that we can adjust the tool and check compatibility.
Technical data
| Dimensions (D × W × H) | 20.5 × 10 × 7.5 cm |
|---|---|
| Weight | approx. 1 kg |
Video
Codes
Select a code to view that variant.
| Zipper size | Code |
|---|---|
| 4 mm | |
| 6 mm | |
| 8 mm |